Heating and Cooling Products

Skip Navigation Links
Locate an AAON Sales Representative
[ Log In]

Quick Links

AAON Products

Literature

Skip Navigation Links

 

Sales Literature

The following brochures include concise information about each series and its specific capabilities and variations.


Air Handling Units (Catalog, Custom, & Direct and Indirect Fired)
55-240 tons, RZ Series (923 KB)
RZ Series, packaged DX units available with R-410A refrigerant and an air-cooled, water-cooled, or evaporative-cooled condenser. Standard features included walk-in service and controls compartment that have full length hinges with lockable handles, double wall high performance composite panel construction, and direct drive backward curved plenum blowers. Options include energy recovery wheels, modulating humidity control, blow-through configurations, make up air capability, and high efficiency filters.
2-140 tons, RN/RQ Series (940 KB)
RN/RQ Series packaged DX units are available with R-410A refrigerant and either an air-cooled or water-cooled condenser. Standard features include R-13 double wall high performance composite panel construction, direct drive backward curved plenum supply fans, isolated service and controls compartments, and hinged access doors with lockable handles. Options include variable capacity scroll compressors, energy recovery wheels, modulating humidity control, make up air capability, and air-source, water-source, or geothermal heat pump configurations.
1,200-10,000 cfm, H3/V3 Series (1.1 MB)
Horizontal or vertical, R-410A non-compressorized DX or chilled water indoor air handling unit. Standard features include double wall high performance composite panel construction, backward curved plenum supply fans, and service access doors with zinc cast handles. Options include modulating humidity control, heat pump configurations, make up air capability, and electric, hot water or steam heating. Can be matched with the AAON CB and CC Series condensing units.
23-70 tons, SA Series (662 KB)
Vertical self contained units available in a modular design with R-410A variable capacity scroll compressors, spring isolated direct drive backward curved plenum fans, and water-cooled or remote air-cooled condensers. Standard features include 10-100% variable capacity scroll compressors, sound attenuating double wall rigid polyurethane foam insulated cabinet construction, multiple factory installed discharge location options and shell and tube or brazed plate refrigerant-to-water heat exchangers. Options include air-source, water-source and geothermal heat pump configurations, VFD controlled supply fans, modulating humidity control, waterside economizer, and hot water or steam preheating.
3-70 tons, M2 Series (1.4 MB)
Modular R-410A non-compressorized DX or chilled water indoor air handling unit or packaged self-contained unit. Standard features include double wall foam panel construction, backward curved plenum supply blowers, and hinged access doors with zinc cast handles. Options include energy recovery wheels, modulating humidity control, and make up air capability.

6,400-52,000 cfm, M3 Series (531 KB)
Modular chilled water or DX indoor air handling unit with multiple heating options. Standard features include rigid polyurethane foam panel construction, direct drive backward curved plenum supply blowers, hinged access doors with zinc cast lockable handles, and slide out coil assemblies. Options include energy recovery wheels, modulating hot gas reheat humidity control, makeup air capability, and blow-through fan configurations. Can be matched with the AAON condensing units or chillers and outdoor mechanical rooms.
45-230 tons, RL Series (754 KB)
Large commercial, packaged DX units available with R-410A refrigerant and an air-cooled, water-cooled, or evaporative-cooled condenser. Standard features included walk-in service and controls compartment, double wall high performance composite panel construction, and direct drive backward curved plenum blowers. Options include energy recovery wheels, modulating humidity control, blow-through configurations, make up air capability, and high efficiency filters.
800-2,000 cfm, F1 Series (544 KB)
Vertical or multi-position residential and light commercial R-410A indoor air handling unit. Standard features include foil faced insulation, factory installed TXV, and forward curved supply blower with variable speed ECM motor. Options include modulating humidity control, heat pump configuration, and electric or hot water heating. Can be matched with an AAON CB and CC Series condensing unit.
Condensers & Condensing Units
2-70 tons, CB/CF Series (1.1 MB)
CB/CF Series split system condensing units reflect the proven reliability and engineering excellence from the premier manufacturer of heating and cooling products. All selected options are factory installed to minimize field installation time and reduce cost. AAON CB/CF Series condensing units boast the same benefits that customers have come to expect from other AAON equipment: serviceability, quiet operation, reliability, high efficiency, durable construction, and a number of premier options that provide the flexibility to suit a wide variety of job requirements.
55-140 tons, CN Series (1.4 MB)
Condensing units with VFD Controlled Variable Speed Scroll Compressors, Microchannel Condenser Coils, Double Wall Rigid Polyurethane Foam Injected Panel Construction, and a Compressor and Control Compartment with Lockable Hinged Service Access Doors. Options include Modulating Hot Gas Reheat, VFD Controlled Variable Speed Condenser Fans, and Flooded Condenser 0°F Low Ambient Control. The CN Series can be matched with AAON Indoor and Outdoor DX Air Handling Units.
45-230 tons, CL Series (556 KB)
Condensing unit available with R-410A scroll compressors. Standard features include walk-in isolated service and controls cabinet with service access doors with zinc cast lockable handles, and air-cooled or evaporative-cooled condenser. Options include modulating humidity control, low ambient configurations, and coil and cabinet corrosion protection. Can be matched with the AAON M2, M3, RN, or RL Series air handling units.
Chillers & Outdoor Mechanical Rooms
4-55 tons, LF Series (477 KB)
Chiller and packaged outdoor mechanical room available with R-410A scroll compressors, sound attenuating double wall rigid polyurethane foam panel construction, and a microchannel air-cooled condenser. Standard features include staged or 10-100% variable capacity scroll compressors, shell and tube or brazed plate evaporators, and hinged service access doors with zinc cast lockable handles. Options include VFD controlled building pumps, VFD controlled condenser fans, and flooded condenser head pressure control low ambient options. Can be matched with any of the AAON chilled water air handling units.
45-140 tons, LN Series (1.2 MB)
Chiller and outdoor mechanical rooms available with staged or VFD controlled variable speed R-410A scroll compressors. Standard features include microchannel condensers, sound attenuating double wall rigid polyurethane foam panel construction, and lockable hinged service access doors. Options include shell and tube or brazed plate evaporators, constant or variable flow water pumping packages, and low ambient options.
45-540 tons, LZ Series (671 KB)
Chiller and Outdoor Mechanical Room available with R-410A scroll compressors, Turbocor R-134a centrifugal compressors and air-cooled or evaporative-cooled condensers. Standard features include walk-in service and control compartment, sound attenuating double wall rigid polyurethane foam panel construction, and lockable hinged service access doors. Options include high efficiency boilers, constant or variable flow water pumping packages and low ambient options. Can be matched with any of the AAON airside products.
50-400 tons, FZ Series (636 KB)
Fluid coolers are engineered for performance and serviceability. VFD controlled fans and high efficiency air-cooled heat exchangers are available to maximize performance. All models feature double wall rigid polyurethane foam panels construction with service compartments that allow maximum accessibility while installing and maintaining the equipment. The fluid cooler can also be provided with factory engineered and installed pumping packages, eliminating the need for an indoor mechanical room.
500-6,000 MBH, BL Series (540 KB)
Packaged outdoor boiler mechanical room with natural gas or propane as the fuel source. Standard features include walk-in service and controls compartment, sound attenuating double wall high performance composite panel construction, and factory installed building and recirculating pumping packages. Options include redundant boilers, redundant pumps, and building pump VFDs. Can be matched with any of the AAON airside products.
Packaged Rooftop Units
55-240 tons, RZ Series (923 KB)
RZ Series, packaged DX units available with R-410A refrigerant and an air-cooled, water-cooled, or evaporative-cooled condenser. Standard features included walk-in service and controls compartment that have full length hinges with lockable handles, double wall high performance composite panel construction, and direct drive backward curved plenum blowers. Options include energy recovery wheels, modulating humidity control, blow-through configurations, make up air capability, and high efficiency filters.
2-140 tons, RN/RQ Series (940 KB)
RN/RQ Series packaged DX units are available with R-410A refrigerant and either an air-cooled or water-cooled condenser. Standard features include R-13 double wall high performance composite panel construction, direct drive backward curved plenum supply fans, isolated service and controls compartments, and hinged access doors with lockable handles. Options include variable capacity scroll compressors, energy recovery wheels, modulating humidity control, make up air capability, and air-source, water-source, or geothermal heat pump configurations.
45-230 tons, RL Series (754 KB)
Large commercial, packaged DX units available with R-410A refrigerant and an air-cooled, water-cooled, or evaporative-cooled condenser. Standard features included walk-in service and controls compartment, double wall high performance composite panel construction, and direct drive backward curved plenum blowers. Options include energy recovery wheels, modulating humidity control, blow-through configurations, make up air capability, and high efficiency filters.
Self Contained Units
3-18 tons, SB Series (754 KB)
Water-source/geothermal heat pump vertical self contained units engineered for high performance and energy efficient full and part load operation. Standard features include a 10-100% variable capacity scroll compressor, variable speed ECM driven direct drive backward curved plenum fans, sound attenuating double wall rigid polyurethane foam insulated cabinet construction and coaxial refrigerant-to-water heat exchanger. Factory available options include remote air-cooled condenser and air-source heat pump configurations, split configuration for retrofit or space limited applications, modulating hot gas reheat humidity control, high efficiency filtration and electric, hot water or steam heating.
23-70 tons, SA Series (662 KB)
Vertical self contained units available in a modular design with R-410A variable capacity scroll compressors, spring isolated direct drive backward curved plenum fans, and water-cooled or remote air-cooled condensers. Standard features include 10-100% variable capacity scroll compressors, sound attenuating double wall rigid polyurethane foam insulated cabinet construction, multiple factory installed discharge location options and shell and tube or brazed plate refrigerant-to-water heat exchangers. Options include air-source, water-source and geothermal heat pump configurations, VFD controlled supply fans, modulating humidity control, waterside economizer, and hot water or steam preheating.
3-70 tons, M2 Series WSHP (3.2 MB)
Modular packaged self-contained unit available as a geothermal or water-source heat pump. Standard features include double wall foam panel construction, backward curved plenum supply fans, and hinged access doors with lockable handles. Options include energy recovery wheels, duel fuel, modulating hot gas reheat humidity control, and makeup air capability.

Geothermal & Water-Source Heat Pump Units
1/2 - 20 tons, WH Series Horizontal Water-Source Heat Pumps (866 KB)
AAON WH Series Horizontal Water-Source Heat Pumps incorporate state-of-the-art manufacturing processes with the latest HVAC design technical knowledge to create a WSHP product with innovative design, performance, and serviceability. The technologically advanced AAON WSHP manufacturing line is unmatched in the industry. Standard features included aluminum cabinet construction, toolless access panels, bottom service access, aluminum microchannel air coil, and 5 year parts warranty.
1/2 - 30 tons, WV Series Vertical Water-Source Heat Pumps (1.0 MB)
AAON WV Series Vertical Water-Source Heat Pumps incorporate state-of-the-art manufacturing processes with the latest HVAC design technical knowledge to create a WSHP product with innovative design, performance, and serviceability. The technologically advanced AAON WSHP manufacturing line is unmatched in the industry, utilizing a unique production methodology that integrates mass production with mass customization and allows production of hundreds of units per day.
2-230 tons, WSHP Rooftop Units (2.2 MB)
AAON Water-Source Heat Pumps Rooftop Units incorporate the AAON long term commitment and dedication to excel as the premier manufacturer of rooftop equipment. Standard features include double wall foam insulated construction, direct drive backward curved plenum fans, energy efficiency refrigerant-to-water heat exchangers, and hinged service access to all sections of the unit. A few of the selectable options include dual fuel heating, energy recovery wheel, modulating hot gas reheat humidity control, and modulating head pressure control valve.
3-70 tons, M2 Series WSHP (3.2 MB)
Modular packaged self-contained unit available as a geothermal or water-source heat pump. Standard features include double wall foam panel construction, backward curved plenum supply fans, and hinged access doors with lockable handles. Options include energy recovery wheels, duel fuel, modulating hot gas reheat humidity control, and makeup air capability.

3-18 tons, SB Series WSHP (1.1 MB)
Water-source Heat Pump vertical self-contained units engineered for high performance and energy efficient full and part load operation. Standard features include a 10-100% variable capacity scroll compressor, variable speed ECM driven direct drive backward curved plenum fans, sound attenuating double wall rigid polyurethane foam insulated cabinet construction, and coaxial refrigerant-to-water heat exchanger. Factory available options include remote air-cooled condenser and air-source heat pump configurations, split configuration for retrofit or space limited applications, modulating hot gas reheat humidity control, high efficiency filtration and electric, hot water or steam heating.
23-70 tons, SA Series WSHP (1.3 MB)
Vertical self-contained units available in a modular design with R-410A variable capacity scroll compressors, spring isolated direct drive backward curved plenum fans, and water-cooled or remote air-cooled condensers. Standard features include 10-100% variable capacity scroll compressors, sound attenuating double wall rigid polyurethane foam insulated cabinet construction, multiple factory installed discharge location options and shell and tube or brazed plate refrigerant-to-water heat exchangers. Options include air-source, water-source, and geothermal heat pump configurations, VFD controlled supply fans, modulating hot gas reheat humidity control, waterside economizer, and hot water or steam preheating.
Air-Source Heat Pumps
2-140 tons, RN/RQ Series (940 KB)
RN/RQ Series packaged DX units are available with R-410A refrigerant and either an air-cooled or water-cooled condenser. Standard features include R-13 double wall high performance composite panel construction, direct drive backward curved plenum supply fans, isolated service and controls compartments, and hinged access doors with lockable handles. Options include variable capacity scroll compressors, energy recovery wheels, modulating humidity control, make up air capability, and air-source, water-source, or geothermal heat pump configurations.
45-230 tons, RL Series (754 KB)
Large commercial, packaged DX units available with R-410A refrigerant and an air-cooled, water-cooled, or evaporative-cooled condenser. Standard features included walk-in service and controls compartment, double wall high performance composite panel construction, and direct drive backward curved plenum blowers. Options include energy recovery wheels, modulating humidity control, blow-through configurations, make up air capability, and high efficiency filters.
2-70 tons, CB/CF Series (1.1 MB)
CB/CF Series split system condensing units reflect the proven reliability and engineering excellence from the premier manufacturer of heating and cooling products. All selected options are factory installed to minimize field installation time and reduce cost. AAON CB/CF Series condensing units boast the same benefits that customers have come to expect from other AAON equipment: serviceability, quiet operation, reliability, high efficiency, durable construction, and a number of premier options that provide the flexibility to suit a wide variety of job requirements.
45-230 tons, CL Series (556 KB)
Condensing unit available with R-410A scroll compressors. Standard features include walk-in isolated service and controls cabinet with service access doors with zinc cast lockable handles, and air-cooled or evaporative-cooled condenser. Options include modulating humidity control, low ambient configurations, and coil and cabinet corrosion protection. Can be matched with the AAON M2, M3, RN, or RL Series air handling units.
Natatorium & Pool Room Units
55-240 tons, RZ Series (799 KB)
RZ Series, packaged DX units available with R-410A refrigerant and an air-cooled, water-cooled, or evaporative-cooled condenser. Standard features included walk-in service and controls compartment that have full length hinges with lockable handles, double wall high performance composite panel construction, and direct drive backward curved plenum blowers. Options include energy recovery wheels, modulating humidity control, blow-through configurations, make up air capability, and high efficiency filters.
2-140 tons, RN/RQ Series (940 KB)
RN/RQ Series packaged DX units are available with R-410A refrigerant and either an air-cooled or water-cooled condenser. Standard features include R-13 double wall high performance composite panel construction, direct drive backward curved plenum supply fans, isolated service and controls compartments, and hinged access doors with lockable handles. Options include variable capacity scroll compressors, energy recovery wheels, modulating humidity control, make up air capability, and air-source, water-source, or geothermal heat pump configurations.
45-230 tons, RL Series (2 MB)
Large commercial, packaged DX units available with R-410A refrigerant and an air-cooled, water-cooled, or evaporative-cooled condenser. Standard features included walk-in service and controls compartment, double wall high performance composite panel construction, and direct drive backward curved plenum blowers. Options include energy recovery wheels, modulating humidity control, blow-through configurations, make up air capability, and high efficiency filters.
2-70 tons, CB/CF Series (1.1 MB)
CB/CF Series split system condensing units reflect the proven reliability and engineering excellence from the premier manufacturer of heating and cooling products. All selected options are factory installed to minimize field installation time and reduce cost. AAON CB/CF Series condensing units boast the same benefits that customers have come to expect from other AAON equipment: serviceability, quiet operation, reliability, high efficiency, durable construction, and a number of premier options that provide the flexibility to suit a wide variety of job requirements.
55-140 tons, CN Series (1.4 MB)
Condensing units with VFD Controlled Variable Speed Scroll Compressors, Microchannel Condenser Coils, Double Wall Rigid Polyurethane Foam Injected Panel Construction, and a Compressor and Control Compartment with Lockable Hinged Service Access Doors. Options include Modulating Hot Gas Reheat, VFD Controlled Variable Speed Condenser Fans, and Flooded Condenser 0°F Low Ambient Control. The CN Series can be matched with AAON Indoor and Outdoor DX Air Handling Units.
45-230 tons, CL Series (556 KB)
Condensing unit available with R-410A scroll compressors. Standard features include walk-in isolated service and controls cabinet with service access doors with zinc cast lockable handles, and air-cooled or evaporative-cooled condenser. Options include modulating humidity control, low ambient configurations, and coil and cabinet corrosion protection. Can be matched with the AAON M2, M3, RN, or RL Series air handling units.
23-70 tons, SA Series (918 KB)
Vertical self contained units available in a modular design with R-410A variable capacity scroll compressors, spring isolated direct drive backward curved plenum fans, and water-cooled or remote air-cooled condensers. Standard features include 10-100% variable capacity scroll compressors, sound attenuating double wall rigid polyurethane foam insulated cabinet construction, multiple factory installed discharge location options and shell and tube or brazed plate refrigerant-to-water heat exchangers. Options include air-source, water-source and geothermal heat pump configurations, VFD controlled supply fans, modulating humidity control, waterside economizer, and hot water or steam preheating.
3-18 tons, SB Series (754 KB)
Water-source/geothermal heat pump vertical self contained units engineered for high performance and energy efficient full and part load operation. Standard features include a 10-100% variable capacity scroll compressor, variable speed ECM driven direct drive backward curved plenum fans, sound attenuating double wall rigid polyurethane foam insulated cabinet construction and coaxial refrigerant-to-water heat exchanger. Factory available options include remote air-cooled condenser and air-source heat pump configurations, split configuration for retrofit or space limited applications, modulating hot gas reheat humidity control, high efficiency filtration and electric, hot water or steam heating.

 

Note: These files are provided in PDF format and require software for viewing. Click on the icon below to download ADOBE® Reader to view and print the files. ADOBE® Reader to view and print the files.

© Copyright AAON, All Rights Reserved. | Privacy Policy | Terms of Use | Contact Us