AAON

Heating and Cooling Products

Skip Navigation Links
Locate an AAON Sales Representative
[ Log In]

Quick Links

AAON Products

Air Handling Units

Condensers/Condensing Units

Related Literature:

CB Series

AAON CB Series Condensers & Condensing Units are engineered to be energy efficient, long lasting, and easy to install. Standard features include variable speed ECM driven condenser fans, two step compressors, and a continuous fin condenser coil with louvered coil guard. CB Series Condensing Units can be used in residential and commercial application, matching with AAON air handling units.

CB Series CB Series CB Series CB Series
Applications
  • Air-cooled condensing unit or a remote air-cooled condenser, from 2-5 tons or 24-60 MBH.
  • Available for split system air source heat pump configurations.
  • Two step scroll compressor, 67% and 100% capacity, includes rubber isolation mounts to minimize vibration.
  • Variable capacity scroll compressor (10-100%) for load matching cooling and heating and improved part load efficiency.
Construction
  • Wrap-around, single row condenser coil has no additional rows to trap dirt and debris between and is easier to clean than units with multi-row coils.
  • Louvered condenser coil guards protect the coil from damage and debris.
  • Corrosion resistant polyurethane paint exceeds a 1,000 hour salt spray test.
  • Refrigerant circuit contains automatic low pressure and manual reset high pressure safety cut-outs, suction and liquid line Schrader valves, and a full system charge of R-410A.
Fans and Blowers
  • ECM driven condenser fan provides precise airflow control and reduced power consumption while matching each capacity step of the compressor.
Control
  • Labeled electrical components and color-coded wiring match the unit specific color-coded wiring diagram which is inside the control compartment.
  • Unit controls are contained within single compartment isolated from the air stream for ease of service and quiet operation.
  • Factory run test report, wiring diagram, and Installation, Operation, and Maintenance manual with startup form are provided in the control compartment of every unit.
  • Optional 24 VAC control circuit transformer to prevent exceeding the capacity of the air handler’s control circuit transformer.
Features and Options
  • Split system modulating humidity control is available to provide energy efficient dehumidification, even with low sensible heat loads, without the temperature swings common with on/off reheat systems.
  • High density foam compressor sound suppression blanket to reduce radiated noise.
  • Polymer e-coated coils are available to extend the life of the coils and protect them in corrosive environments.
  • Adjustable fan cycling or modulating fan pressure control allow operation down to 35°F for facilities that require mechanical cooling at lower ambient temperatures.

 

CB
Model		 Compressors/
Circuits		 Discharge Direction Width Height Length
02 1/1 Vertical 37 39 31
03
04 43 37
05
All dimensions are in inches

 

© Copyright AAON, All Rights Reserved. | Privacy Policy | Terms of Use | Contact Us